Description

Bottom Plate Replacement For Ibanez 10 and Power series (Pedals like TS10) There are two major problems when applying Velcro to Ibanez 10 series pedals: 1. The Velcro won't stick to the rubber. 2. When you try to remove it - it will take the bottom label with it, and if it's a valuable vintage pedal, you will lose part of it's value. Th e original plate can be easily replaced by this plate - by following the these steps (SEE PICTURES for reference) 1. In the kit you will get the following: 1*plate (see pic 1) 2. Remove the the metal plate by removing the 4 screws and Place the new plate carefully, and hold it in place (see pic 3) 3. Take four original screws , insert them into the holes and tighten them (see pic 4) NOTE: Screws are not included! When you'll decide to sell your pedal, just switch to the original plate. This plate has a copper shielding on both sides, so it's immune to EMI/RFI interference. *** The listing is only for the plate, the pedal in the pictures is not included! Shipping: Within 3 work days, registered mail via Israel post with tracking number. . I can combine shipping with other bottom plates - up to 8 plates in total for the same shipping cost, ask me for total if you order more than one type of plates. Please note: We strongly support recycling, and do our best to use recycled packages and packing materials in our shipments. If you wish otherwise, please drop us a note. Manufacturer: AQUA-AUDIO